Additional programme settings
en
31
Note:
The length of the program is
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
■
Program settings,
■
Detergent dosage (additional rinse
cycles if required due to foaming),
■
Load size/type of textiles (longer
washing for higher load and for
textiles which absorb more water),
■
Imbalances (e. g. due to fitted
sheets) are offset with several start-
ups of spin cycles,
■
Fluctuations in power supply,
■
Water pressure (infeeding speed).
\
Additional programme
settings
Additional programme settings
Note:
You can find possible additional
programme settings in the overview;
these differ depending on the model.
Speed/Eco
(
G
/
F
Speed/Eco)
Button with two possible settings for
adapting the selected programme:
■
G
Speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected
programme, without the Speed/Eco
setting.
Note:
Do not exceed the maximum
load.
■
F
Eco
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
programme, without the Speed/Eco
setting.
Select the button to do this. First of all,
you can select the
G
Speed
setting. If
you select the button again, the
F
Eco
setting is active. The respective symbol
is shown in the display when the setting
is activated.
If you select the button again, no setting
is active.
Water/Rinse Plus
(
ë
Water/Rinse Plus)
Additional rinse cycle depending on the
programme; longer programme length
for particularly sensitive skin and/or for
areas with very soft water.
Soak
(
%
Soaking)
Before the main wash cycle starts, the
washing remains for longer in the water
to partially dissolve intensive soiling.
Notes
■
Put detergent in dispenser
I
before
starting the appliance.
■
Load laundry of the same colour.
■
If your appliance does not have this
additional programme setting, you
can soak as follows:
1.
Put detergent in dispenser
II
before
starting the appliance.
2.
Select the
i
Cottons
40 °C
programme and the
A
Start/
Reload
button.
3.
Select the
A
Start/Reload
button
after approx. 10 minutes. The
laundry remains in the soaking
solution.
4.
Leave the laundry to soak for as long
as required, then either select the
A
Start/Reload
button again to
continue the programme or change
the programme.
Содержание WAU28460MY
Страница 47: ...6 ...