background image

26

Starching

NOTICE:  

Laundry must not be treated with fabric 

softener.
Starching is possible in all wash programs if liquid starch 

is used. Measure starch into compartment 

M

 in 

accordance with the manufacturer's instructions (clean 

first if necessary).

Dyeing/bleaching

Dye should only be used in normal household quantities. 

Salt may damage stainless steel. Always follow the dye 

manufacturer's instructions. 
Do 

not

 use the washing machine to bleach clothes.

Soaking

1.

Pour soaking agent/detergent into compartment 

II

 in 

accordance with the manufacturer's instructions.

2.

Turn the program selector to 

Cotton Normal Cold

 

program.

3.

Touch 

Start/Pause

.

4.

After approximately. ten minutes, touch 

Start/Pause.

5.

After the required soaking time, touch 

Start/Pause

 

again to continue or change the program.

NOTICES

Load laundry of the same color. 

No additional detergent is required; the soaking 

solution is used for washing.

Quick 30

(approx. 30 

minute cycle)

1/2 

load

Hot

Warm

Cold

High

Med

Low
No spin

Easy-care fabrics made of cot-

ton, linen, synthetic fibers or 

blended fabrics;
suitable for lightly soiled laun-

dry

Delicates

1/3
load

Hot

Warm

Cold

Med

Low
No spin

For delicate, washable fabrics, 

e.g. made of cotton, satin, syn-

thetic fibres or blended fabrics 

(e.g. curtains)
bulky items (e.g. comforters)

SpeedPerfect, Prewash, Extra 

Rinse +1, +2

Perm Press 
Light Soil

1/2 

load

Hot

Warm

Cold

High

Med
Low
No spin

Cotton, linen synthetic or 

blended fabrics

Perm Press
Heavy Soil

SpeedPerfect, Prewash, Extra 

Rinse +1, +2

Perm Press
Tips

Do not wash new multicolored laundry together with other laundry.
The cycles are time-controlled for lightly soiled fabrics. If fabrics are heavily soiled, reduce the load.
Rinse cycles use cold water only.

Programs

Max. 

Load 

up to:

Selectable program set-

tings,
default settings (bold)

Type of laundry

Additional program settings 

; Information

Temperature Spin speed

Содержание WAT28402UC









































Отзывы: