Positioning and connecting
en
13
In addition
, a hose clamp (24 - 40 mm
diameter, available from specialist
retailers) is required to connect the
water outlet hose to a siphon.
Useful tool
■
Spirit level for aligning
■
Wrench with:
– WAF13 for loosening the
transport braces and
– WAF17 for aligning the appliance
feet
Safety instructions
:
Warning
Risk of injury!
■
The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■
When the washing machine is lifted
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■
If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
■
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
■
If in doubt, have the appliance
connected by a specialist.
Installation surface
Note:
The washing machine must be
aligned in a stable manner so that it
does not move around.
■
The installation surface must be firm
and level.
■
Soft floors/floor coverings are not
suitable.
A
Mains lead
B
Bag:
■
Installation and operating
instructions
■
Customer Service location
directory*
■
Warranty*
■
Supplementary sheet for the
installation and operating
instructions*
■
Cover caps for openings after
the transport braces have
been removed
■
Home Connect Installation
Guides*
C
Water inlet hose on aquaStop
models
D
Water outlet hose
E
Elbow for securing the water
outlet hose*
F
Cold water inlet hose on
Standard/Aqua-Secure models
*
Depending on the model
