Basic operation
en
35
3.
Insert the detergent drawer.
Adding detergent and care
product
Notes
¡
Please read the information in the
sec-
tions to ensure that you use the
appliance safely.
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement:
Find out the optimum
dosage for "detergent and care
1.
Pull out the detergent drawer.
2.
Pour in detergent.
3.
If required, add the care product.
4.
Push in the detergent drawer.
Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Start / Reload
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: "End".
Adjusting the "Ready in" time
before the programme starts
You can readjust the selected "Ready
in" time before the programme starts.
1.
Press
Start / Reload
.
2.
Press
Finish in
repeatedly until the
display indicates the desired
"Ready in" time.
3.
Press
Start / Reload
.
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Start / Re-
load
.
3.
To resume the programme, after
the desired soaking time, press
Start / Reload
.