Bosch WAN24279EP, Руководство пользователя и инструкции по установке

Страница: 35 / 60

Basic operation
en
35
13.5 Using a measuring aid
for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
1.
Press down on the insert and re-
move the detergent drawer.
1
2
2.
Insert the measuring aid.
3.
Insert the detergent drawer.
13.6 Adding detergent and
care product
Notes
¡
Please read the information in the
Safety →
Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement:
Find out the optimum
dosage for detergent and care
product. →
Page 32
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 19
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.7 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Inicio / Pausa + Carga
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: "End".
13.8 Adjusting the "Ready in"
time before the pro-
gramme starts
You can readjust the selected "Ready
in" time before the programme starts.
1.
Press
Inicio / Pausa + Carga
.