Troubleshooting
en
41
Fault
Cause and troubleshooting
The programme does
not start.
Termin.
is activated.
▶
Check whether
Termin.
is activated.
Laundry is caught in the door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Inicio / Pausa + Carga
to start the pro-
gramme.
The door cannot
be opened.
– –– is activated.
▶
Continue the programme by selecting or and
pressing
Inicio / Pausa + Carga
.
"Resuming the programme when the programme
status is Rinse Hold", Page 30
The temperature is too high.
▶
Wait until the temperature has dropped.
▶
"Cancelling the programme", Page 30
Water level is too high.
▶
Select a suitable programme for draining.
→
Power failure.
▶
Open the door using the emergency release.
→
The water is not drain-
ing.
Drain pipe or water outlet hose is blocked.
▶
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
▶
Ensure that the drain pipe and water drain hose are
not kinked or trapped.
Drain pump is blocked.
▶
"Cleaning the drain pump", Page 34
– –– is activated.
▶
Continue the programme by selecting or and
pressing
Inicio / Pausa + Carga
.
"Resuming the programme when the programme
status is Rinse Hold", Page 30
The water outlet hose is connected too high.
▶
Install the water outlet hose at a maximum height of
1 metre.
Pump cover is not correctly assembled.
▶
Correctly assemble the pump cover.
Содержание WAN24268ES
Страница 51: ......