operation
en
29
13.5 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
1.
Pull out the detergent drawer.
2.
Press down on the insert and re-
move the detergent drawer.
3.
Insert the measuring aid.
4.
Insert the detergent drawer.
13.6 Adding detergent and
care product
Notes
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡
Observe the information about de-
tergents and care products
→
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.7 Starting the programme
Requirement:
A programme is set.
"Setting a programme", Page 28
▶
Press
Start / Reload
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows the programme
duration or the "Ready in" time.
a
After the programme has ended,
the display shows: "End".
13.8 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡
The programme is set.
→
"Setting a programme", Page 28
¡
The "Ready in" time is set and ac-
tivated.
→
1.
Press
Start / Reload
.
The activated "Ready in" time is
paused.
2.
Press
Finished in
repeatedly un-
til the display indicates the desired
"Ready in" time.
3.
Press
Start / Reload
.
The changed "Ready in" time is ac-
tivated.
Содержание WAN24265BY
Страница 51: ......