Troubleshooting
en
41
Fault
Cause and troubleshooting
The programme does
not start.
Laundry is caught in the door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Start / Reload
to start the programme.
The door cannot
be opened.
– –– is activated.
▶
Continue the programme by selecting
Spin
or
Drain
and pressing
Start / Reload
.
"Resuming the programme when the programme
status is Rinse Hold", Page 30
The temperature is too high.
▶
Wait until the temperature has dropped.
▶
"Cancelling the programme", Page 30
Water level is too high.
▶
Select a suitable programme for draining.
→
Power failure.
▶
Open the door using the emergency release.
→
The water is not drain-
ing.
Drain pipe or water outlet hose is blocked.
▶
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
▶
Ensure that the drain pipe and water drain hose are
not kinked or trapped.
Drain pump is blocked.
▶
"Cleaning the drain pump", Page 34
– –– is activated.
▶
Continue the programme by selecting
Spin
or
Drain
and pressing
Start / Reload
.
"Resuming the programme when the programme
status is Rinse Hold", Page 30
The water outlet hose is connected too high.
▶
Install the water outlet hose at a maximum height of
1 metre.
Pump cover is not correctly assembled.
▶
Correctly assemble the pump cover.
Detergent dosage is too high.
Содержание WAN24167BY
Страница 51: ......