en
operation
30
Notes
¡
Only use liquid detergents that are
self-flowing
¡
Do not mix different liquid deter-
gents
¡
Do not mix detergent and fabric
softener
¡
Do not use products that have ex-
pired or are highly congealed
¡
Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach)
¡
Use dyes sparingly as salt may
damage stainless steel
¡
Do not use bleaching agents in the
appliance
operation
13 Basic operation
operation
Note:
You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.
13.1 Switching on the appli-
ance
Requirement:
The appliance has
been correctly installed and connec-
ted.
→
"Installation and connection",
▶
Press .
The switch-on process takes a few
seconds.
13.2 Setting a programme
1.
Turn the programme selector and
set the required programme.
→
2.
If necessary, adjust the pro-
gramme settings →
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 30
▶
Adjust the programme settings.
→
Observe the information about op-
erating logic.
Note:
The programme settings are
not saved permanently for the pro-
gramme.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡
A programme has been set.
¡
The programme settings have
been adjusted.
▶
Press and hold for approx. 3
seconds.
Press to call up the saved pro-
gramme.
Note:
To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Note:
To prevent creasing, take note
of the maximum load for the
→
.
Requirement:
The laundry is pre-
pared.
→
1.
Open the door.
Make sure that the drum is empty.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
Содержание WAL28RH2GR
Страница 2: ...https digitalguide bsh group com mat no 9001689407 ...
Страница 55: ......