en
Programme default settings
16
0
Programme default
settings
Programme default settings
The temperature, spin speed and
programme duration ("finished in" time)
for all programmes are preset at the
factory.
These are displayed in the display panel
after selecting the programme.
You can change the default settings as
follows.
Temperature (Temp °C)
Depending on the programme
progress, you can change the preset
temperature (in °C) before and during
the programme.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The maximum temperature that can be
set depends on the programme which
has been selected.
Overview of programmes
Spin speed (rpm
0
)
Depending on the programme
progress, you can change the spin
speed (in rpm; rotations per minute)
before and during the programme.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
Setting – – –
0
: Rinse hold = without
final spin, the laundry remains in the
water after the final rinse.
You can select "Rinse hold" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the programme has ended.
The maximum speed that can be set
depends on the model and programme
that have been selected.
finished in time
When you select the programme, the
relevant programme duration is displayed.
The programme duration is automatically
adjusted when the programme is running.
Changes to the programme default
settings or programme settings also
change the programme duration.
Before starting the programme, the
programme end ("finished in" time) can be
preselected in increments of one hour (h =
hours) up to a maximum of 24 hours.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
Note:
The programme duration is
included in the selected "finished in" time.
After the start, the preselected time e.g.
8
h
is displayed and the time counts down
to the start of the wash programme. The
programme duration is then displayed,
e.g.
2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
1.
Press Start/
Reload
2.
Press the
"finished in"
5
button
repeatedly until the required number
of hours is displayed.
3.
Press the
Start
/Reload button.
Adding laundry while the preselected
time continues running:
1.
Press Start/
Reload
2.
The symbols
YES
and
¼
light up on
the display panel. The washing
machine door can be opened and
laundry can be added.
3.
Close the washing machine door.
4.
Press the
Start
/Reload button. The
preselected time continues to run.
