Bosch WAK24268EE Скачать руководство пользователя

Страница: 26 / 40

Faults and what to do about them.

Information on the display panel

Faults and what to do about them.

Display

Cause/remedial action

YES

The washing machine door is unlocked. It is possible to add laundry.

■

Temperature too high. Wait until the temperature drops.

■

Water level too high. Not possible to add laundry. Close the washing machine

door immediately, if open. Select

Start

/Pause to continue the programme.

flashes

■

Laundry may be caught. Please open and close the washing machine door

again and select

Start

/Pause.

■

If necessary, push the washing machine door closed or remove the laundry and

push it closed again.

■

If required, switch appliance off and on again; set the programme and make

individual settings; start the programme.

E:17

■

Turn the water tap on fully,

■

supply hose kinked or trapped,

■

water pressure too low. Clean the filter.

Page 24

E:18

■

Detergent solution pump blocked. Clean detergent solution pump.

Page 23

■

The drain hose/waste pipe is blocked. Clean the drain hose on the siphon.

Page 24

E:23

Water in the base tub, appliance leaking. Turn off the tap. Call the after-sales serv-

ice.

Childproof lock activated; deactivate it.

Page 19

flashes

Too much foam detected, a rinse cycle has been switched on

Page 20

Other displays

Switch off appliance, wait five seconds and switch on again. If the display is indi-

cated again, call the after-sales service

Page 28

Faults

Cause/remedial action

Water is leaking out.

■

Attach/replace the drainage hose correctly.

■

Tighten the screw connection of the supply hose.

No water supply.
Detergent not dispensed.

■

Start

/Pause not selected?

■

Tap not turned on?

■

Filter blocked? Clean the filter.

Page 24

■

Supply hose kinked or trapped?

Washing machine door

cannot be opened.

■

Safety function active. Programme stopped?

■

– – –

(Rinse hold = without final spin) selected?

■

Can be opened by emergency release only?

Page 25

Programme does not

start.

■

Start

/Pause or

Ready in

time selected?

■

Washing machine door closed?

■

Childproof lock activated? Deactivate.

Page 19

Содержание WAK24268EE









































Результаты поиска

Содержание WAK24268EE

Отзывы:

Похожие инструкции для WAK24268EE

Бренды по названию

Популярные бренды

Bosch WAK24268EE, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WAK24268EE

Отзывы:

Похожие инструкции для WAK24268EE

Бренды по названию

Популярные бренды