background image

en

    Positioning and connecting

34

leaks and water damage, you must 

follow the instructions in this section.

Notes

In addition to the safety information 

listed here, the local water and 

electricity supplier may have special 

requirements.

If in doubt, have the appliance 

connected by a specialist.

Installation surface

Note:  

The washing machine be stable 

so that it does not move around.

The installation surface must be firm 

and level.

Soft floors/floor coverings are not 

suitable.

Installation on a base or a 

wooden joist floor

Caution!

Damage to the appliance

The washing machine may "wander" 

and tip/topple from the base when 

spinning.

The feet of the appliance must be 

secured with holding brackets.

Order no. WMZ 2200, WX 9756, 

Z 7080X0

Note:  

On wooden joist floors, install the 

washing machine:

In a corner, if possible,

On a water-resistant wooden board 

(min. 30 mm thick) which is screwed 

tightly to the floor.

Installing the appliance in a 

kitchenette

:

Warning

Danger of death!

There is a risk of electric shock if you 

touch live components.

Do not remove the appliance covering 

plate.

Notes

Recess width of 60 cm required.

Only install the washing machine 

underneath a continuous worktop 

that is securely connected to 

adjacent cabinets.

Removing the transport locks

Caution!

Damage to the appliance

The machine is secured for 

transportation using transport locks. 

If the transport locks are not 

removed, the drum, for example, 

may become damaged when the 

machine is operated.

Before using the appliance for the 

first time, make sure that you 

completely remove all four transport 

locks. Keep the locks in a safe 

place.

To prevent transport damage from 

occurring if the appliance is moved 

at a later date, you must refit the 

transport locks before transporting 

the appliance. 

Note:  

Keep the screws and sleeves in 

a safe place.

1.

Take the hoses out of the holders.

Содержание WAK2421SME









































Отзывы: