Bosch WAK20065IN, Инструкция по эксплуатации и руководство по установке

Страница: 18 / 36

en
Operating the appliance
18
Note:
Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash or when
"Ready in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Select the
Start/Pause
A
button. The
indicator lamp lights up and the
programme starts.
During the programme status indicators
show programme progress (programme
sequence).
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Press Start/
Pause
A
.
2.
Select the other programme.
3.
Press
Start
/Pause
A
. The new
programme starts from the
beginning.
Cancel the programme
Programmes at high temperatures:
1.
Press Start/
Pause
A
.
2.
To cool the laundry: Select
O
Rinse
.
3.
Press
Start
/Pause
A
.
For programmes at low temperatures:
1.
Press Start/
Pause
A
.
2.
Select
0
Spin
or
Drain
[
.
3.
Press
Start
/Pause
A
.
Programme end
Indicator lamp
0
for
f
flashes and the
Start/Pause
A
button indicator lamp is
off.
Removing laundry/switching
off the appliance
1.
Open the washing machine door
and remove the laundry.
2.
Set the programme selector to off
position. The appliance is switched
off.
3.
Turn off the water tap.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.
■
Always wait for the end of the
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
■
If the display panel goes off at the
end of a programme, energy-saving
mode is active. To activate the panel,
press any button.