en
Installation and connection
16
4.5 Connecting the appliance
Connecting the water inlet hose
Note
¡
Please read the information in the
Safety →
sec-
tions to ensure that you use the
appliance safely.
1.
Connect the water inlet hose.
2
1
2.
Connect the water inlet hose to a
tap (26.4 mm = 3/4").
¾˝
min.
min.
10 mm
17 mm
3.
Open the water tap carefully and
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
▶
Secure the water outlet hose
against unintentional loosening.
Note:
Observe the draining heights.
The maximum draining height is
100 cm.
Drainage into a
siphon
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Drainage into a
washbasin
Fix and secure
the water outlet
using an elbow.
→
Drainage into a
plastic pipe with
rubber sleeve or
into a gully.
Fix and secure
the water outlet
using an elbow.
→