en
Basic operation
32
Note:
The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Notes
¡
Please read the information in the
Safety →
sec-
tions to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of
the maximum load for the
→
Requirement:
The laundry is pre-
pared and sorted.
→
1.
Open the door.
Make sure that the drum is empty.
2.
Load the laundry unfolded into the
drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
13.5 Adding detergent and
care product
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
Requirement:
Find out the optimum
dosage for detergent and care
product. →
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.6 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Start / Reload
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: End.
13.7 Adding laundry
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Press
Start / Reload
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start / Reload
.