en
Operating the appliance
16
■
Pour liquid detergent into the
corresponding dispenser and place
in the drum.
Pour the detergent and care products
into the appropriate compartments:
1.
Pull out the detergent drawer as far
as possible.
2.
Add detergent and/or care products.
3.
Close the detergent drawer.
Measuring aid* for liquid detergent
*depending on the model
Position the measuring aid for dosing
the correct amount of liquid detergent:
1.
Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2.
Slide the measuring aid forward, fold
it down and click it into place.
3.
Reinsert the drawer.
Note:
Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash.
For models without a measuring aid
,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Press the
Start button
. The indicator
light lights up and the programme
starts.
Adding laundry
After starting the programme, you can
add or remove laundry:
1.
Press the
Start button
to cancel the
programme.
The Start button indicator lamp
flashes and the machine checks
whether it is possible to add laundry.
Note:
Do not leave the washing
machine door open for too long
when adding laundry, as water from
the laundry may leak out.
2.
To continue the programme, press
the
Start button
again.
Changing the programme
If you have started the wrong
programme by mistake, you can
change it as follows:
1.
Press the
Start button
to cancel the
programme.
2.
Select a different programme.
3.
Press the
Start button
again. The
new programme starts from the
beginning.
Cancel the programme
1.
Press the
Start button
to cancel the
programme.
2.
To cool the laundry: Select the
Rinse
programme.
Measuring aid*
A
For liquid detergent
Compartment
II
Detergent for the main wash,
water softener, bleach, stain
remover
Compartment
i
Softener, starch,
do not exceed the maximum
Compartment
I
Detergent for prewash
