Bosch VitaPower 4 MMB63 Series, Руководство пользователя, Страница: 33 / 316

Before using for the first time
en
33
You can switch on and operate the
appliance once the blender jug has
been correctly positioned and the lid
is locked.
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the basic settings. Clean
the appliance and accessories.
Cleaning the appliance and
parts
1.
Clean all parts that come into con-
tact with food before using for the
first time.
→
"Cleaning and servicing",
Page 36
2.
Put the cleaned and dried parts
out ready for use.
Basic operation
Basic operation
Basic operation
Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
1.
Pull the power cable out to the re-
quired length.
2.
To shorten the cable, push it into
the cable storage compartment.
Recommended speeds
You can find out here which speeds
you can use to achieve optimal res-
ults.
Setting Use
Briefly blending food with in-
stantaneous switching at max-
imum speed.
Blending, puréeing, emulsifying,
frothing and cutting up food.
Blending food that should not
be cut up too small.
Tip:
Please use our recipe sugges-
tions to gain experience with your
new appliance.
→
"Overview of recipes", Page 37
Using the blender to process
food
WARNING
Risk of injury!
Improper use may cause injuries.
▶
Only use the appliance once it is
fully assembled.
1.
Prepare the food.
For example, cut up large items of
food.
2.
Turn the blender jug upside down.
3.
Open the retaining bracket.
→ Fig.
3
4.
Align the EasyClick blade insert
with the tap in the blender jug.
5.
Push the EasyClick blade insert
into the blender jug and close the
retaining bracket until it clicks into
place.
→ Fig.
3
6.
Set the rotary switch to ⁠.
7.
Place the blender jug onto the
base unit and rotate in a clockwise
direction until it locks into place.
→ Fig.
4