Bosch VIP-X16XF-E, Руководство по установке

Страница: 17 / 32

VIP X16 XF E Connection | en 17
Bosch Sicherheitssysteme GmbH Installation Manual F.01U.281.864 | V2 | 2012.12
The audio signals are transmitted two-way and in sync with the video signals. The following
specifications should be complied with in all cases.
The stereo plug must be connected as follows:
1. Connect an audio source to the AUDIO IN socket with a 3.5 mm (1/8 in) stereo plug.
2. Connect an audio receiver with line-in connection to the AUDIO OUT socket with a
3.5 mm (1/8 in) stereo plug.
Note that the audio function is not activated by default. To use audio connections activate the
corresponding setting when configuring the unit.
5.4 Connecting alarm inputs and relay output
Alarm inputs
The VIP X16 XF E encoder has four alarm inputs on the terminal block. The alarm inputs are
used to connect to external alarm devices such as door contacts or sensors. With the
appropriate configuration, an alarm sensor can automatically connect the VIP X16 XF E
encoder to a remote location, for example.
2 × audio in: Impedance 9 kohm typ., 5.5 V
p-p
max. input voltage; microphone amplifier
60 dB max.
1 × line out: 3.0 V
p-p
typ. output voltage at 10 kohm impedance
Contact AUDIO IN AUDIO OUT
Tip Channel 1 Channel 1
Middle ring Channel 2 —
Lower ring Ground Ground