Bosch VEZ-400 Series, Руководство по установке

Страница: 13 / 30

Installing a Recessed Mount (AUTODOME 4000)
Overview
This chapter details how to install a recessed mount for the AUTODOME 4000 camera.
Notice!
The image sensors in modern cameras are highly sensitive and require special care for proper
performance and extended lifetime. Follow the guidelines for optimum results with your
camera:
Do not expose to direct sunlight or bright spotlights in operating and nonoperating
conditions.
Avoid bright lights in the field of view of the camera. Bright lights cause a “smearing” effect,
which is visible as white lines above and below the highlight. Prolonged exposure to bright
lights may cause bleaching of the sensor's color filters. This will be visible as colored spots in
the picture and is irreversible.
Parts List
The following table lists the parts included in the In-ceiling (recessed) mount (VEZ-A4-IC):
Quantity Part
1 In-ceiling mount: VEZ-A4-IC
1 White trim ring with 2 (two) M3 captive screws
1 Black trim ring with 2 (two) M3 captive screws
1 Security Torx wrench
1 Installation manual (this booklet)
Installing the Recessed Mount
To mount to a recess mount, do the following:
1.
Determine a secure location for the recessed mount (supplied separately).
Figure 4.1: Recess Mount Dimensions
2. Drill or cut a 7 in. hole with a tolerance of +/- 1/8 in. (177.8 mm +/- 2.2 mm).
4
4.1
4.2
4.3
AUTODOME 4000 Mini PTZ Dome Installing a Recessed Mount (AUTODOME 4000) | en 13
Bosch Security Systems, Inc. Installation Manual 2015.08 | | Recessed Mount