Bosch Vero Professional, Руководство пользователя

Страница: 39 / 132

35
de en
Cleaning the brewing unit
(refer also to the quick reference guide)
In addition to the automatic cleaning pro-
gramme, the brewing unit
23 should be
removed regularly for cleaning.
Switch to the “energy saving mode” with
the
a
button 2 .
Switch the appliance off completely at the
power on/off switch
1 O / I ; no buttons
are lit.
Slide the door opener
22 to the right and
open the door 21 to the brewing unit 23 .
Slide the red lock 23b on the brewing unit
23 completely to the left.
Press the red button 23a , grasp the
brewing unit 23 by the recessed grips
( Fig. E ) and remove carefully.
Rinse the brewing unit 23 under running
water.
Important: Clean without detergent and do
not place in the dishwasher.
Wipe out the inside of the appliance with
a damp cloth.
Allow the brewing unit
23 and the inside
of the appliance to dry.
Reinsert the brewing unit
23 fully into the
appliance.
Slide the red lock
23b fully to the right
and close the door 21 .
●
●
●
●
●
●
●
●
●
●
Storing accessories
The espresso machine has special com-
partments for storing the accessories and
quick reference guide inside the appliance.
To store the measuring spoon 14 , milk
pipe 10d and tube 10c , remove the water
tank 11 and insert the parts in the shaped
recesses 13 .
The quick reference guide has its own
compartment by the brewing unit
23 .
Open the door 21 to the brewing unit.
Grasp the red cover 25 to the storage
compartment 24 by the tab and remove.
Stow away the quick reference guide,
replace the cover
25 and close the door
to the brewing unit 21 .
Tips on energy saving
The fully automatic espresso machine
switches to “energy saving mode”
automatically after one hour (factory
setting). The appliance uses very little
power in “energy saving mode”. The
default time of one hour can be altered:
(see Menu settings, “
A
UTO OFF AFTER
”) .
If the appliance is not being used, switch
it off at the power on/off switch
1 O / I on
the front.
If possible, do not interrupt coffee or milk
froth dispensing. Cutting the coffee or
milk froth dispensing process short
results in higher energy consumption and
in more residual water collecting in the
drip tray.
Descale the appliance regularly to avoid a
build-up of limescale. Limescale residue
results in higher energy consumption.
●
●
●
●
–
–
–
–