Bosch VEI-308V05-13W Скачать руководство пользователя страница 15

Страница: 15 / 56

Dinion Infrared Imager

Planning | en

Bosch Security Systems, Inc.

User Manual

F.01U.263.417 | 3.0 | 2012.01

Required Tools (User-supplied)

–

2.5 mm (0.1 in.) straight-blade screwdriver

–

Socket wrench; 14 mm (9/16 in.) socket

–

Drill; 5.5 mm (7/32 in.) drill bit

Select a suitable location that protects the camera from

accidental damage, tampering and environmental conditions

exceeding the specifications of the camera.

Follow these mounting guidelines:

Locate the camera such that it cannot be easily interfered

with, either intentionally or accidentally.

Select a

smooth, flat mounting surface

that can support

the combined weight of the camera and mounting

hardware under all expected conditions of vibration and

temperature. Recommended mounting height is at least

4 m (13 ft); however, optimal conditions will vary with the

specific installation environment.

Metal conduit (for protection of power cables and

input/output cables)

Mounting hardware (such as a corner mount adapter

pole mount adapter, available separately from

Bosch)

Quantity Item

WARNING!

IMPORTANT MOUNTING INSTRUCTIONS

This apparatus must be securely attached to the wall in

accordance with these installation instructions. Failure to

follow installation instructions may result in injury or death.

CAUTION!

Ensure that the selected location is protected from falling

objects, accidental contact with moving objects, and

unintentional interference from personnel. Follow all applicable

building codes.

Содержание VEI-308V05-13W

























































Результаты поиска

Содержание VEI-308V05-13W

Отзывы:

Похожие инструкции для VEI-308V05-13W

Бренды по названию

Популярные бренды

Bosch VEI-308V05-13W, Руководство пользователя

Результаты поиска

Содержание VEI-308V05-13W

Отзывы:

Похожие инструкции для VEI-308V05-13W

Бренды по названию

Популярные бренды