Bosch VDA-PMT-AODome, Руководство по установке

Страница: 6 / 10

Oudoor Minidome Wall and Pipe Mounts Installation | en 6
Bosch Security Systems Installation manual AM18-Q0632 | v1.0 | 2012.08
3.2 Installing the Pipe Mount
Figure 3.2 Pipe Mount installation
1. Determine location for pipe mount.
2. Use the four holes in flange as template to mark drill holes in ceiling in which to position
secure mount.
3. Drill the four holes into ceiling.
4. Drill fifth hole in center of four-hole pattern to mount flange.
5. Use this hole to feed wires through mount.
6. Assemble flange to pipe and pipe to cap.
Note: Select pipe length of 20 cm (7.9 in.), 30 cm (11.8 in.), or 50.5 cm (20 in.).
7. Pull wires through pipe starting at flange end.
8. Assemble pipe mount to ceiling.
9. Connect all wires to camera.
10. Pull any excess wire back into mount tube.
11. Assemble camera to mount and fix with three (3) M5 screws (supplied).
12. Install camera dome housing cover.