Bosch Security Systems | 2003-08 | Version 2
EN
| 4
VCM7D130/00T & VC7D1305T
| Installation Instructions
3. INSTALLATION (refer to fig. 1)
To obtain the best results from your new Dome camera, read these
instructions carefully before use. Retain the manual for future
reference. Recommended for indoor Application Only.
This chapter describes the installation of the Dome camera. For more
detailed information about the installation and operation of the
system monitor you should consult the monitor manuals.
Remark: When the system configuration is altered, the system
monitor needs to check and memorise the cameras and accessories
connected to its inputs. This is done automatically when the mains
power is switched on (rear switch).
1
2b
2a
Use a screwdriver to
release clip
3
120º Horz; 120º Vertical;
360º Rotation
Pull Dome cover
to remove
Mounting screws
Fig. 1
