en |
3
7 620 200 073 | 09.2020
Robert Bosch GmbH
en
Important information | Switching on/off | Technical data
Road safety
Make sure that your ability to drive is not
impaired and your vision is not blocked by the
device or the wiring connected to it.
Risk of electrical shock or fire
If you disassemble the device, it might result in
electrical shock or fire.
Do not open the device.
Malfunctions
Do not use the device if you notice any
malfunctions such as bad charging perfor-
mance or bad data transmission. Continued
use of a malfunctioning system may result in
accidents, fire or electrical shock.
Installation notes
Risk of electrical short or fire
The installation of the device by a qualified
specialist workshop is strongly recommended.
Note:
Please also observe the information given in
the device drawings at the end of this docu-
ment.
Please observe the following installation notes:
f
The device must be installed in the car interior.
f
The device must be mounted to a solid, even
surface.
f
The installation location of the device must not be
exposed to heat, liquids or vibration.
f
The installation location of the device must provide
the required free space for plugs.
f
After mounting the device, the connection cables
must be fastened, so that no forces affect the plugs.
f
Do not exceed the maximum length of the device‘s
supply cables.
f
Ensure that the device‘s supply cables are pro-
tected against sharp edges.
f
Only use suitable screws and washers for mounting
the device.
Switching on/off
The device is automatically switched on or off by the
Coach Infotainment system of your Vehicle.
Technical data
Power Supply
12/24 V (8 V – 32 V)
Current consumption
In operation
2 A (12 V) / 1 A (24 V)
Max. current
3 A (12 V) / 1.5 A (24 V)
Standby current
max. 20 μA @ 24 V
Input
USB
USB HSD
Outputs
analogue video | CVBS | Split
USB OTG
Phone: 1.5 A (Android) /
2.1 A (iOS)
USB Host
Audio: 1.5 A (Android) /
2.1 A (iOS)
Operating temperature -20°C to +70 °C
Storage temperature
-40 °C to +85 °C
Dimensions (L x W x H) 141 x 62.5 x 22.5 mm (with
connector)
Weight
Approx.
103 g
Certification
CE, UN ECE R10,
UN ECE R118
Subject to changes!