18
| English
(11)
Plunge cut saw blade
a)
(12)
Sanding plate
a)
(13)
Sanding sheet
a)
(14)
Depth stop
a)
(15)
Segment saw blade
a)
(16)
Handle (insulated gripping surface)
(17)
Dust extraction hose
a)
(18)
Dust extraction outlet
a)
(19)
Dust extraction system
a)
(20)
Clamping lever for dust extraction system
a)
(21)
Dust extraction adapter
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless multifunction tool
UniversalMulti 12
Article number
3 603 A03 0..
Orbital stroke rate
preselection
●
Constant electronic control
●
Soft start
●
AutoClic tool holder
●
Rated voltage
V=
12
No-load speed n
0
min
−1
10000–20000
Oscillation angle on left/
right
°
1.4
Weight according to
EPTA-Procedure 01:2014
A)
kg
1.1
Recommended ambient
temperature during char-
ging
°C
0 to +35
Permitted ambient temper-
ature during operation and
during storage
°C
–15 to +50
Recommended batteries
PBA 12 V…
Recommended chargers
GAL 12...
A) Measured at 20−25 °C with rechargeable battery
PBA 12V
2.5Ah
.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑4
.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
83
dB(A); sound power level
94
dB(A). Uncertainty K =
3
dB.
Wear hearing protection!
Working without the Auxiliary Handle
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841‑2‑4
(sanding),
EN 62841‑2‑11
(cutting):
Sanding: a
h
=
4
m/s
2
, K=
1.5
m/s
2
,
Cutting with plunge cut saw blade: a
h
=
10
m/s
2
, K=
1.5
m/s
2
,
Cutting with segmential saw blade: a
h
=
12
m/s
2
, K=
1.5
m/s
2
.
Working with the auxiliary handle
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841‑2‑4
(sanding),
EN 62841‑2‑11
(cutting):
Sanding: a
h
=
6
m/s
2
, K=
1.5
m/s
2
,
Cutting with plunge cut saw blade: a
h
=
17
m/s
2
, K=
2
m/s
2
,
Cutting with segmential saw blade: a
h
=
16
m/s
2
, K=
1.5
m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.
There is risk of injury
from unintentionally pressing the on/off switch.
Battery Charging
u
Use only the chargers listed in the technical data.
Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note:
The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
1 609 92A 67R | (09.03.2021)
Bosch Power Tools
