Bosch UFLED, Руководство по установке

Страница: 5 / 26

AEGIS UFLED Safety | en 5
Bosch Security Systems Installation Manual F.01U.123.987 | 1.0 | 2010.04
5. Controls adjustment - Adjust only those controls specified
in the operating instructions. Improper adjustment of
other controls may cause damage to the unit.
6. Power sources - Operate the unit only from the type of
power source indicated on the label.
7. Servicing - Unless qualified, do not attempt to service this
unit yourself. Refer all servicing to qualified service
personnel.
8. Replacement parts - Use only replacement parts specified
by the manufacturer.
9. Installation - Install in accordance with the manufacturer's
instructions and in accordance with applicable local codes.
10. Attachments, changes or modifications - Only use
attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not
expressly approved by Bosch, could void the warranty or,
in the case of an authorization agreement, authority to
operate the equipment.
1.3 Important notices
Grounding - For mounting the unit in potentially damp
environments, ensure to ground the system using the ground
connection of the power supply connector (see section:
Connecting external power supply).
WARNING!
When the lamp is running it is hot to the touch. Before touching
switch off the illuminator and allow to cool for a minimum
period of 10 minutes.
WARNING!
LED Radiation
Do not view directly with optical instruments (magnifiers).
Do not stare directly into the lamp at a distance of less than
1.7 m (5.6 ft).