Bosch TWK 77 Series, Инструкция по эксплуатации

Страница: 14 / 22

12
en
Congratulations on purchasing this
Bosch appliance. You have acquired
a high-quality product that will bring
you a lot of enjoyment.
Parts and operating
controls
1 Kettle (with water level indicator)
2
Lid
3 Lid release button
4 ON/OFF
O
switch
5 Light (interior)
6 Limescale filter (removable)
7
Base
8 Cable tidy
Important: Use the kettle 1 only with its
included base 7 .
● Only fill the kettle with water. Milk and
instant beverages will burn and damage
the appliance. Never operate the kettle
1 without water and do not overfill it;
observe the min and max markings.
If the kettle is too full, the water will boil
over!
Before using
for the first time
● Remove any stickers or film.
● Unroll the right amount of cable from the
cable tidy 8 and plug it in.
● Fill the kettle
1
with water. Bring the water
to a boil and discard it. Repeat the proce -
dure. This will make sure that the kettle is
clean for normal use.
● When the water comes to a boil for the
first time, add a tablespoon of white
vinegar.
Boiling water
● Fill the kettle with fresh water through the
spout or the open lid 2 (press lid release
button 3 ).
● Check the amount by reading the water
level indicator markings ( min and max ).
● Close the lid 2 until it locks and place the
kettle 1 on the base 7 .
● Press the ON/OFF
O
switch 4 ; the light 5
switches on.
● The kettle switches off automatically
when the heating process has finished;
the light 5 switches off.
The appliance can also be switched off at
any time by pulling up the switch 4 .
Warning: If you remove the kettle 1 from
the base and replace it before the heating
process is over, the kettle will not continue
to heat the water.
N.B.: Use the kettle 1 only while the lid 2 is
closed and the limescale filter 6 is in place.
For physical reasons, the base
7
may
collect some condensation water.
This is normal; it does not mean that the
kettle 1 leaks.
After boiling, let the kettle cool down for
5 minutes before refilling it with water.
Do not turn on the appliance if the kettle 1
is empty, otherwise the overheat control will
engage and the appliance will switch itself
off automatically.