4
TRANSFLOW Transmission Cooling System Service Tool J-45096
Control Panel
Main Function Switch
The following table provides a quick reference for the main function switch positions:
Switch Position
Flush
Idle
Flow
Code
Description
Allows pressurized automatic transmission fluid with a high pressure pulse
of air to flush the contaminated oil from the T.O.C. If any debris exists in
the T.O.C., it will also be flushed when the machine is in this mode.
Standby mode; zero pressure applied to the T.O.C. and cooler lines.
Tests the flow rate of the T.O.C. and cooler lines.
Provides a seven-character, encrypted warranty code following a success-
ful flow test. Note: The flow test must run for a minimum of 8–10 seconds
and be above 0.5 gpm for a code to be generated.
Red light indicates when
machine is pressurized
LCD Display
Window
ATF Fill
Port
Main Function
Switch
Operating
Instructions
Main Power
Switch
