Bosch TR 200, Руководство пользователя, Страница: 24 / 88

24
TR 200
English
Proceed as described above to delete all indi-
vidually set starting times, until the display
shows
Select day +/-
. Briefly depress the cancel
button C (r).
After this, the programme pre-set by the facto-
ry reappears (for all days: 1
st
starting time for
heating operation 06:00 hrs; 1
st
starting time
for economic operation 22:00 hrs, further
starting times
--:--
).
When no more alterations are necessary
close the lid.
6.2.5 Control knob set to
“Holiday”
Setting the period of absence
Turn the control knobr (n) to . The display
(e) shows:
The number of days absent is set by depress-
ing the buttons “–” (o) or “+” (p).
Briefly depressing the button alters the
number of days absent by 1 day, when the
button is depressed for a longer period the
displayed days run faster.
Note: The present day must be entered as
a day absent, i.e. the regulator
starts with the holiday programme
immediately. The day of return
should only be entered if no heating
operation is required for that day!
Example: You would like to leave your house
for a two weeks' holiday. You leave the house
Saturday afternoon. Return is planned for Sat-
urday, two weeks later, and you would like the
house to be heated by then.
If you enter the number of days absent shortly
before leaving, the number entered must be
“14” (Saturday, Sunday, ... Thursday and Fri-
day, since on the Saturday you return you
want the regulator to switch the heating sys-
tem on as usual.
After closing the lid, the display (e) shows:
The regulator immediately regulates to the
temperature set with the control knob (m)
The remaining days until you return are al-
ways displayed. After the set number of days
(at midnight) the regulator automatically termi-
nates economic operation and returns to auto-
matic operation.
If you would like to carry out further alterations
do not yet close the lid.
Please note that the temperature set
with the control knob (m) should be harm-
less to your pets, plants, etc. for the entire
course of your absence.
If you intend to return to your house in the
morning, it might be better to start heating
shortly after midnight instead of waiting for
first heating operation in the morning. In this
case, depress the button
(q). after having
set the number of days absent. The display
shows:
Aut/-
. Now you can set the oper-
ating mode required on return with the button
“+” (p) or “–” (o), either to continuous heating
operation or to automatic operating mode. If
you have selected continuous heating opera-
tion, the temperature is regulated to the value
set with the control knob
(k), beginning at
midnight before your return. Do not forget to
depress the button
(g) after your return in
order to terminate continuous heating opera-
tion.
In case that the holiday operating mode
should be terminated early, it is possible to
either briefly depress the button
(g) twice,
or to set the number of days absent to “0” as
described above.
Continuous heating operation for several days
can also be programmed by setting the
number of days as described above and turn-
ing up the economic temperature to the re-
quired value with the control knob (m).
4217 -23.1/G
Days /-
0
4217 -24.1/G
14 days absent
17:53 16.5°C
☞
Tip