11
en
TES503.. 01/2011
4. Press the
h
button (11).
The
h
button (11) l ashes and the ap-
pliance now heats up for approx. 20
seconds. The display then shows
Pull
milk frother
.
5. Pull the milk frother (6) to open it.
¡
Risk of burns
Milk froth or warm milk comes out of the
milk frother (6) at high pressure. Splashes
of milk can scald. Carefully open the milk
frother (6). Do not touch the outlet (6c) or
aim it at anyone.
6. Close milk frother (6) by pushing it in.
Tip:
For optimal milk froth quality, use cold
milk with a fat content of at least 1.5 % if
possible.
Important:
Dried milk residue is difi cult to
remove, so the milk frother (6)
must be
cleaned with lukewarm water immediately
after use and rinse using the
Rinse milk
system
programme (see page 12).
Maintenance and daily
cleaning
¡
Risk of electric shock
Unplug the appliance before cleaning it.
Never immerse the appliance in water.
Do not use a steam cleaner.
● Wipe the outside of the appliance with a
soft, damp cloth.
● Do not use abrasive cloths or cleaning
agents.
● Always remove any limescale, coffee,
milk or descaling l uid residue immedi-
ately. Such residue can cause corrosion.
● Pull the drip tray (8c) with the coffee
grounds container (8b) forward and out.
Remove the panel (8a) and the grate
(8d). Empty and clean the drip tray and
coffee grounds container.
● Remove drawer (4) and clean.
● Remove the l oat (8e) and clean with a
damp cloth.
●
Do not put the following items in the
dishwasher:
cover of the storage com-
partment (5c), drip tray panel (8a), l oat
(8e), drawer (4), brewing unit (5a).
