30
Presented by Bob Pattengale
BOSCH TECH 2
1-800-71-TRAIN (1-800-718-7246) OR www.auto-video.com
POWERTRAIN NAVIGATION MENU REVIEW
Diagnostics Menu
Using The CANDi Module
After connecting the CANDi module to the
vehicle and the Tech 2, we ran the DTC
Information test. Note in the screen capture to
the right, that the first and second ECUs have a
“No Communication” status. That is because
this vehicle does not use these modules. Keep
this in mind as you run tests such as this on
the vehicles that you are working on. Not all
vehicles will be equipped with the modules
that are listed on the screen.
Also note that the Radio and the Body Control
Module have DTCs listed. If you wanted to look
at the data pertaining to those DTCs that exist,
all you need to do is click on the “View All
DTCs” tab at the bottom of the screen as
illustrated by the screen capture.
A good habit to get into regarding this procedure is to begin to document the DTCs on your
diagnostic worksheet. This is a good way to keep a log on the vehicle as you diagnose it, just in
case you accidentally clear the codes during your diagnostic process.
