Bosch TASSIMO style TAS110 Series, Руководство пользователя

Страница: 34 / 200

en
Troubleshooting
34
Fault Cause troubleshooting
Water is dripping from the
brewing unit. T DISC is damaged, leaking
or not correctly pierced.
▶
Use a new T DISC.
▶
Only use T DISCs once.
1.
Wait until the brewing process has
come to an end and the appliance
has cooled down.
2.
Remove the T DISC.
3.
Clean the brewing unit.
→
"Cleaning the appliance",
Page 31
The piercing unit is not inser-
ted correctly.
▶
Press the piercing unit into the
holder using both thumbs until it
clicks audibly into place.
There is water under the cup
stand. Condensation has formed
due to technical reasons.
▶
Remove excess water with a soft
cloth.
Information on display panel
Fault Cause troubleshooting
No LED is lit. Appliance is in idle mode.
▶
Press .
All LEDs flashing. Voltage in the house system
is incorrect.
1.
Pull out the mains plug and re-insert
it.
2.
If the problem persists for a longer
period, have the voltage of your
property checked by an electrician.
LED lights up.
Water tank has not been suf-
ficiently filled.
1.
Fill the water tank with fresh, cold
water up to the mark
⁠.
2.
Insert the water tank.
LED lights up even
though there is enough wa-
ter in the water tank.
Float is stuck in the water
tank.
1.
Descale the appliance.
→
"Descale the appliance",
Page 31
2.
Reach into the water tank and
move the float up and down.
Water tank is wrongly inser-
ted.
1.
Insert the water tank correctly.
2.
Push the water tank into the appli-
ance until it clicks into place.
LED lights up.
Build-up of limescale in the
appliance.
▶
Descale the appliance.
→
"Descale the appliance",
Page 31