6
en
Problem
Cause
Solution
Water is dripping from
the brewing unit.
The T DISC is
damaged or leaky.
The T DISC has not
been pierced correctly.
Do not use T DISCs that are damaged.
Only use each T DISC once.
Wait until the brewing stage has come to
an end and the appliance has cooled down.
Remove the T DISC and clean the brewing unit.
Please refer here to the section
Cleaning
.
The piercing unit has
not been inserted
correctly.
Press the piercing unit into its holder using
both thumbs (until an audible click is heard).
On the surface below
the cup stand there is
water.
This is condensation.
Condensation may appear and is not caused
by any fault with the appliance. Wipe the water
away with a cloth.
The beverage quantity
does not meet your
requirements.
The T DISC bar
code provides the
recommended volume
for every beverage
selected. This
volume can also be
adapted to personal
requirements.
Use the drink size buttons (
N
–
N
–
O
)
to set
your individual drink volume before you begin
brewing.
Reduced quantity:
During the brewing process, press the
Start / Stop
button to interrupt this stage.
Increased quantity:
Press and hold the
Start / Stop
button until the
required beverage quantity has been reached.
Buildup of limescale
in the appliance
could cause reduced
quantity.
Descale the appliance. Please refer here to the
section
Descaling
.
The orange Service
T DISC is damaged or
lost.
The following accessories can be
obtained via Bosch customer service,
www.bosch-home.com
and
www.tassimo.com
(see the end of this instruction manual for
contact details): Orange Service T DISC (item
no. 00576837), descaling tabs (item no.
TCZ6004)
Descaling tabs are
required.
Not all the settings
(drink intensity
n
,
drink temperature
Z
or drink size
N
) are
available.
There are different
setting options
depending on the type
of drink.
Troubleshooting
www.devicemanuals.eu/
