11
12/2011
en
How to use your TASSIMO machine
i
Note:
Make sure that your TASSIMO machine
has been set up for use as described in the
section titled “First use of your TASSIMO
machine” on page 5.
To prepare your favorite beverage, proceed
as follows:
►
Turn the TASSIMO machine on by
pressing the ON / OFF switch (1).
►
Place a suitable cup on the stand (7)
according to the type of beverage.
Adjust the height of the cup stand, if
necessary, or remove it altogether for
large cups or glasses.
►
Always set the cup stand as high as
possible.
1.
Open the brewing unit by lifting the
handle (4a) and then pushing the
brewing unit up.
2.
Select a T DISC beverage and insert
it into the T DISC holder (4b) with the
printed side down.
Make sure that the l ap of the T DISC is
located in the slot in the front.
3.
Close the brewing unit by i rst bringing it
down and then pushing the handle (4a)
i rmly to the machine.
►
When the T DISC has been detected,
the
+
/
−
LEDs light up.
1.
2.
3.
!
IMPORTANT
For optimum results, i ll the tank
only
with cool, fresh, non-carbonated water
each day. Do not use chemically
softened water.
¡
CAuTION
To avoid the risk of scalding:
– Do not use chemically softened
water!
Doing so could cause excess
pressure and damage to T DISC,
which could re sult in injury if brewing
unit is opened before the Status
LED
F
(3c) has stopped blinking.
– Always wait until the Status LED
F
(3c) has stopped blinking before at-
tempting to open the brewing unit.
TAS55_UC.indb 11
16.12.2011 13:45:10