Rinse System NL
according to the manufacturer's
instructions, only use up to a
degree of hardness of 21 °dH
without adding softening salt.
s The water hardness is 0 - 6
°dH. You don't need softening salt
Regenerating the softening
system after x washings
7
Additional running time in minutes
Additional water consumption in liters
Additional electricity consumption in kWh
6
5
0.05
to use.
The stated consumption values are
laboratory measured values, which
are determined according to the
currently valid standard and based on
the Eco 50° program and the factory-
set water hardness value of 13 - 16
°dH.
1.
on
to press.
2.
Approx. 3 seconds on
Busy-
to access the basic settings.
a The display shows Hxx.
a The display shows
to give.
3.
Press as many times until
the display shows H00.
G
Rinse System
lance flushing system
4.
To save the settings, press for
approx. 3 seconds.
a The water softener has been
switched on and the refilling salt
indicator is deactivated.
Rinse System
rinse aid
For optimal drying results it is best
to use the rinse aid.
Only use rinse aid for household
dishwashers.
Regenerate the softening
system
Filling rinse aid
In order to maintain trouble-free
operation of the softening system,
the device regularly performs a
regeneration of the softening system.
The softening system is regenerated
in all programs before the end of the
main wash cycle. This increases the
running time and the consumption
values of, for example, water and
electricity.
If the rinse aid refill indicator lights
up, add rinse aid. Only use rinse aid
for domestic dishwashers.
1.
Press and lift the tab on the lid of
the rinse aid container .
2
Overview of the consumption values
when regenerating the
softening system
Here you will find an overview of the
maximum extra runtime and
consumption values when
regenerating the softening system.
1
25
