Bosch SPE53B55UC, Руководство пользователя

Страница: 26 / 56

en-us
Basic Operation
26
12.5 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24 hours.
1.
Press ⁠.
a
"h:01" appears on the display.
2.
Use to set the required
start time for the wash cycle.
3.
Press ⁠.
a
This activates the electronic de-
lay time.
Tip: To deactivate the electronic
delay time, press repeatedly
until "h:00" appears on the dis-
play.
12.6 Starting the wash
cycle
▶
Press .
a
The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡
If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
¡
You can only change a cycle in
progress if you can cancel it
first.
→
"Terminating the wash cy-
cle", Page 26
¡
To save energy, the appliance
switches off automatically
10 minutes after the end of the
wash cycle. If you open the ap-
pliance door immediately after
the wash cycle has ended, the
appliance will switch off after 4
seconds.
12.7 Activating the button
lock
The button lock prevents the ap-
pliance from being operated acci-
dentally or incorrectly while run-
ning.
▶
Press for approx. 3 sec-
onds.
a
The button lock is activated and
will be automatically deacti-
vated at the end of the cycle.
a
flashes on the display
when the appliance is running.
a
The button lock remains acti-
vated with a power failure.
12.8 Deactivating the
button lock
▶
Press for approx. 3 sec-
onds.
12.9 Interrupting the wash
cycle
1.
Press On/Off.
The program is saved and the
appliance switches off.
2.
Press On/Off.
3.
Press to resume the wash
cycle.
12.10 Terminating the
wash cycle
To end a cycle early or to switch
from one that has already started,
you will need to cancel it first.
▶
Press for approx.
4 seconds.
a
All displays light up.
a
As soon as the displays are off,
the display shows "0h:01m"
and the residual water is
pumped out.