Location 170 - 171
Entry Guard Timer (Seconds, 16 Seconds)
Location 172 - 173
Sensor W atch Time (Days)
Location 174
Codepad Lockout Time (10 Second)
Location 175
Siren Run Time (M inutes)
Location 176
Siren Sound Rate (Slow < -Sound-> Fast)
Location 177
Swinger Shutdown Count
Location 178
Dialler Options 1
Location 179
Dialler Options 2
Location 180
System Options 1
Location 181
System Options 2
Location 182
System Options 3
Location 183
System Options 4
Location 184
Consumer Options 1
Location 185
Consumer Options 2
Location 186 - 191
Area 1 Zone Allocations
12 3
0 0
0
10
7
0
5
1 = Enable Dialler Reporting Functions
2 = Enable Remote Arming Via The Telephone
4 = Enable Upload/Download Via BOSCH Alarm Link Software (CC816)
8 = Terminate “Alarm Link” Session On Alarm
0
1 = Send Open/Close Reports Only If A Previous Alarm Has Occurred
2 = Enable First To Open, Last To Close Reporting (Partitioning Only)
4 = Send Open/Close Reports When In STAY Mode
8 = Delay Siren Until Transmission Is Complete
1
1 = Enable Forced Arming
2 = Enable BOSCH Smart Lockout
4 = Enable Monitoring Of Horn Speaker
8 = Allow Horn Speaker Beeps For Radio Remote Control Operation
2
1 = Enable BOSCH Radio Key/Keyswitch Interface or BOSCH Night Arm Station
2 = Enable Handover Delay To Be Sequential
4 = Enable Codepad Panic To Be Silent
8 = Enable Access Denied To Be Silent
0
1 = Enable Main Codepad To Display Data For Area #1
2 = Enable Resetting Of Sirens From Both Areas
4 = Ignore AC Fail
8 = Enable Handover Of Zone Pulse Count
1 = Enable AC Fail In 1 hour
2 = Extend Time To Wait For Handshake From 30 Seconds To 1 Minute
4 = Enable Control Panel To Power Up In The Disarmed State
8 = Reserved
0
2
1 = Send Test Reports Only When The System Is Armed
2 = Enable Operation Of Siren & Strobe In STAY Mode
4 = Enable Answering Machine Bypass To Work Only When The System Is Armed
8 = Enable Codepad Extinguish Mode
0
1 = Enable “User Code + 0 + AWAY” Function To Arm/Disarm BOTH Areas At Same Time
2 = Enable Single Button Arming in Away and Stay mode
4 = Enable Single Button Disarming from Stay mode
8 = Enable Alarm Memory Reset on disarm
0 0 0 0 0 0
Solution 6+6 Wireless On/Off
Quick Reference Guide
ISSUE 1.20
Page 12
Bosch Security Systems Pty Limited
