Troubleshooting
aus
55
Fault
Cause and troubleshooting
Home Connect cannot
be implemented cor-
rectly.
Home Connect set incorrectly.
▶
Please consult the documents supplied for
Home Connect.
Technical fault is present.
▶
Please consult the information about support in the
documents supplied for Home Connect.
Fault
Cause and troubleshooting
Refill indicator for
rinse aid lights up.
Insufficient rinse aid.
1.
Add Rinse aid →
.
2.
Set the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page 29
Refill indicator for
rinse aid does not
light up.
Rinse aid system is switched off.
▶
Set the amount of rinse aid to be dispensed.
Fault
Cause and troubleshooting
Water is left in the ap-
pliance at the end of
the programme.
Filter system or area under the filters is blocked.
1.
.
2.
.
Programme has not yet ended.
▶
Wait until the programme ends or cancel the pro-
gramme with
Reset
.
▶
"Terminate programme", Page 36
Appliance cannot be
switched on or oper-
ated.
Software update is taking place.
▶
Wait until the software update has finished.
Appliance functions have failed.
1.
Pull out the mains plug or switch off the fuse.
2.
Wait at least 2 minutes.
3.
Connect the appliance to the power supply.
4.
Switch the appliance on.
Appliance does not
start.
The mains fuse has tripped.
▶
Check the relevant fuse.
Mains cable is not inserted.
1.
Check whether the socket works.
2.
Check whether the mains cable is properly inserted
in the socket and on the rear of the appliance.
Appliance door is not closed properly.
▶
Close the appliance door.
Содержание SMS8ZDI01A
Страница 63: ......