aus
Basic operation
32
3.
Press
.
a
This activates timer programming.
Tip:
To deactivate timer program-
ming, press repeatedly until "h:00"
appears in the display.
Starting the programme
▶
Press
.
a
The programme has ended when
the display shows "0h:00m".
Notes
¡
If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡
You can only change a pro-
gramme when running if you can-
cel it.
→
¡
The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Tip:
To assist the drying, we recom-
mend that the door will be partially
opened after the cycle.
Interrupting programme
Note:
When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1.
Press .
a
The programme is saved and the
appliance switches off.
2.
Press to resume the pro-
gramme.
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
▶
Press
for approx.
4 seconds.
a
All displays light up.
a
As soon as the displays are off,
the display shows "0h:01m" and
the residual water is pumped out.
a
The programme is cancelled and
ends after approx. 1 minute.
Switching off appliance
1.
Please note the information on
"Safe use" →
.
2.
Press .
Tip:
If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
Содержание SMS2ITW01A
Страница 55: ......