aus
Troubleshooting
44
Fault
Cause and troubleshooting
E:90-01 will light up
alternately.
Mains voltage is too low.
This is not a fault on the appliance.
1.
Contact an electrician.
2.
Have the mains voltage and electrical installation
checked by an electrician.
E:92-40 will light up
alternately.
Filters are soiled or blocked.
▶
Clean the filters.
→
A different error code
appears in the display
window.
E:01-00 to E:90-10
A technical fault is present.
1.
Press .
2.
Unplug the appliance or switch off the fuse.
3.
Wait at least 2 minutes.
4.
Insert the mains plug of the appliance in a socket
or switch on the fuse.
5.
Switch the appliance on.
6.
If the problem occurs again:
‒
Press .
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact Customer Service →
the error code.
Fault
Cause and troubleshooting
Tableware is not dry.
No rinse aid used or dosage set too low.
1.
Add Rinse aid →
.
2.
Set the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page 26
Programme or programme option has no drying
phase, or the drying phase is too brief.
▶
Select a programme with drying, e.g. intensive,
strong or ECO programme.
Some option buttons decrease the drying result, e.g
varioSpeed.
Water collects in recesses of the tableware or cutlery.
Содержание SMI4HTS01A
Страница 59: ......