en-us
Basic Operation
32
Notes
¡
If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
¡
You can only change a cycle in
progress if you can cancel it
first.
¡
To save energy, the appliance
switches off automatically
10 minutes after the end of the
wash cycle. If you open the ap-
pliance door immediately after
the wash cycle has ended, the
appliance will switch off after 4
seconds.
13.7 Interrupting the wash
cycle
1.
Press On/Off.
The program is saved and the
appliance switches off.
2.
Press On/Off.
3.
Press
to resume the wash
cycle.
13.8 Terminating the
wash cycle
To end a cycle early or to switch
from one that has already started,
you will need to cancel it first.
1.
Open the appliance door.
2.
Press
for approx.
4 seconds.
3.
Close the appliance door.
a
All displays light up.
a
As soon as the displays are off,
the display shows "00h:01m"
and the residual water is
pumped out.
a
The cycle is cancelled and
ends after approx. 1 minute.
13.9 Switching off the
appliance
CAUTION
To avoid risk of injury, always use
caution when opening the door
during or following a wash cycle
as hot water or steam may es-
cape.
▶
Do not fully open the door until
water noises have stopped and
steam has subsided.
1.
Please note the information on
2.
Press On/Off.
