Water softening system / special salt
en-us
13
+
Water softening
system / special
salt *
Water softening system / special salt
To ensure good rinsing results, the
dishwasher requires soft water, i.e.
water which is low in lime, otherwise
limescale will be deposited on the
utensils and interior container. Tap
water above 7° dH (1.2 mmol/l)
must be softened. The water
is softened with special salt
(regeneration salt) in the water
softening system of the dishwasher.
The setting and therefore the
required amount of salt depends on
the degree of hardness of your tap
water (see following water hardness
table).
* optional feature which may or may
not be included with your
dishwasher.
Instructions for use of
included “Water Hardness
Test Strip”
Only use salt designed for automatic
dishwashers. Never use household
water softener salt or table salt.
Follow the instructions below for the
included test strip. (If purchasing a
different test strip, follow
manufacturers instructions).
1.
Run the water at the kitchen sink
for 5 minutes.
2.
Dip the end of the test strip with
the colored squares into the tap
water for 1 second and shake off
excess water.
3.
After one minute, compare the
test strip to the chart below and
determine the Dishwasher Water
Softener setting.
4.
Adjust the dishwasher Water
Softener setting.
5.
If required, add salt to the
dishwasher salt chamber as
shown.
Adjusting the water softener settings
Using the test strip included with
your dishwasher
(Purchased test strips may have a
different scale)
Water
softener
setting
Add salt to
salt
dispenser
Water hardness conversion chart
(only necessary if you purchase a
different test strip)
ppm
gpg/°dH
•
:
‹‹
No
0
116
0
6
•
:
‹‚
Yes
117
152
7
8
•
:
‹ƒ
Yes
153
188
9
10
•
:
‹„
Yes
189
223
11
13
•
:
‹…
Yes
224
294
14
17
•
:
ܠ
Yes
295
383
18
22
•
:
‹‡
Yes
384
544
23
31
•
:
‹ˆ
Yes
545
890
32
52
Содержание SHP*78W Series
Страница 2: ...2 ...
