background image

Troubleshooting

 en

39

Fault

Cause

Troubleshooting

E:32-00 will light up altern-
ately or indicator for water
supply lights up.

4.

Unscrew the water connection.

5.

Remove the filter from the supply
hose

6.

Clean the filter.

7.

Re-insert the filter in the supply
hose.

8.

Screw the water connection back
on.

9.

Check the water connection for
leaks.

10.

Restore the power supply.

11.

Switch the appliance on.

E:92-40 will light up altern-
ately.

Filters are soiled or blocked.

Clean the filters. 

→ 

"Cleaning filters", Page 35

E:61-03 will light up altern-
ately. Water is not drained.

Wastewater hose is blocked
or kinked.

1.

Reposition the wastewater hose
without kinks.

2.

Remove residues.

Siphon connection is still
sealed.

Check the connection to the siphon
and open if necessary.

Cover of the wastewater
pump is loose.

Secure the cover of the "Wastewa-
ter pump " 

→ 

Page 50

 so it clicks

into position.

E:61-02 will light up altern-
ately.

Wastewater pump is
blocked.

Clean the wastewater pump. 

→ 

"Clean wastewater pump",

Page 50

Cover of the wastewater
pump is loose

Secure the cover of the "Wastewa-
ter pump " 

→ 

Page 50

 so it clicks

into position.

Содержание SGS2ITW41G

























































Отзывы: