en-us
Troubleshooting
46
Issue
Cause and troubleshooting
There are remov-
able streaks on
glasses, glassware
with a metallic ap-
pearance and silver-
ware.
There is detergent residue in the final rinse. Lid of
detergent dispenser is blocked by dishware and
will not open fully.
1.
Arrange dishware in the upper rack so the tab
collecting tray is not obstructed by dishware.
Items of dishware are blocking the dispenser
lid.
2.
Do not place dishware or fragrance dispensers
in the tab collecting tray.
Dishware has been precleaned too intensively.
The sensors then choose a weaker program.
Stubborn soiling cannot be entirely removed.
▶
Only remove large remnants of food and do not
prerinse dishware.
Irreversible clouding
of glassware.
Glasses are not dishwasher-proof, only suitable
for dishwashers.
▶
Use dishwasher-proof glasses.
Glasses are usually only suitable for cleaning
in a dishwasher, i.e. long-term wear or long-
term changes must be expected.
▶
Avoid a lengthy steam phase (standing time af-
ter wash cycle ends).
▶
Use a program with a lower temperature.
▶
Set the softening system to the water hard-
ness.
▶
Use detergent with a glass protection compo-
nent.
Detergent residue is
present in the deter-
gent dispenser or
the tab collecting
tray.
Spray arms were blocked by dishware so deter-
gent was not rinsed out.
▶
Check that the spray arms are not blocked and
can rotate freely.
Detergent dispenser was damp when detergent
was added.
▶
Only add detergent to the detergent dispenser
when dry.
Excessive formation
of foam occurs.
Hand soap got in the rinse aid dispenser.
▶
Immediately add rinse aid to the dispenser.
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or machine care product used causes
excessive foaming.
▶
Change the brand of detergent.
Содержание SGE53B55UC
Страница 59: ......
