Bosch SEC-3402-304, Руководство по установке

Страница: 16 / 20

16 en | Enabling and Disabling Features Security Escort Point Tracking Transmitter
2018.01 | SE3v1.0 | DL Installation Manual Robert Bosch (SEA) Pte Ltd
4.6 Enable/disable the buzzer
Enable or disable the buzzer feature by setting switch number 5 on the dip switch. Set switch
number 5 to the OFF position to disable the buzzer feature. Set switch number 5 to the ON
position to enable the buzzer feature. Once enabled, the buzzer would sound when an alarm is
triggered and with every auto-track transmission.
Buzzer Feature Switch Number on Dip Switch
5
Disable (default setting) OFF
Enable ON
Tab. 4.5: Buzzer setting on dip switch
4.7 Factory reset
Factory reset should be performed by administrators only . Set all the dip switches to the
OFF position. While pressing the Test button, the transmitter resets after inserting the battery.
If reset is successful, there will be 3 slow consecutive beep tones every 1 second. If reset is
unsuccessful, there will be 2 slow consecutive beep tones every 1 second. Refer to the
following list of values that are being set for the respective features following the factory
reset.
Default Setting
Feature Value
Supervision Tracking Interval 60 minutes
4.8 System programming
A two part ID sticker is located on the enclosure. You need the number on this sticker to
program this device into the system. See the
Security Escort Technical Reference Manual for
programming information for wireless type devices.