Home Connect
NL
Basic setting
Remote Start
Choice
Description
Out
Manually
constant
activate.
This basic setting is only available after you have
connected the appliance with the Home Connect
app.
", page 42activate or de-
Greeting
Factory setting
On
1
Out
Enable or disable the display of the brand
logo when turning on the device.
Reset
Reset changed settings to factory
condition.
Initial commissioning settings must
be specified.
1
Factory setting (may differ depending on the device type)
Change basic settings
Through
hold, the setting values change in
10-minute increments.
and
longer pressed to
1.
Open the appliance door.
2.
Press.
4.
To save the settings, press for
approx. 3 seconds.
3.
Approx. Press for 3 seconds to access
the basic settings.
4.
Press repeatedly until the display
shows the desired setting.
huh
huh
uncle Connect
uncle Connect
5.
Press or repeatedly until the display
shows the desired value.
huh
d
uncle Connect
this device is suitable for network
know. Connect your appliance to a
mobile terminal device to be able to
operate functions via the Home
Connect app.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information on this can be
found at: www.home-connect.com. In
order to use Home Connect, you must
first establish a connection to the
WLAN home network (Wi-Fi
1
) and can
be configured with the Home Connect
app.
†
†Device with WLAN home network
You can change multiple settings.
6.
To save the settings, press for
approx. 3 seconds.
7.
Close appliance door.
Setting time
1.
Approx. Press for 3 seconds to access
the basic settings.
2.
Press repeatedly until the display
reads "Time setting".
3.
Press or repeatedly until the display
shows the desired time.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
41