en |
47
7 620 000 142/143 | 10.2013
Robert Bosch Car Multimedia GmbH
en
Note:
This function is only available if the
"PRSTSCAN" setting has been
selected for the and
6
buttons
in the menu (see the section on
"Setting button functions" in this
chapter).
Starting the scan
f
Press the or
6
button.
"PRSTSCAN" briefly appears on the display.
Each station saved in the current memory bank
is played for about 5 seconds. At the same
time, the display shows the current frequency
or the station name.
Stopping scan
f
Press the or
6
button.
The scan process is stopped. The device
remains tuned to the previously played station.
Scanning receivable stations
(BANDSCAN)
This function allows you to scan all receivable
stations for about 5 seconds each.
Note:
This function is only available if the
"BANDSCAN" setting has been
selected for the and
6
buttons
in the menu (see the section on
"Setting button functions" in this
chapter).
Starting the scan
f
Press the or
6
button.
"BANDSCAN" briefly appears on the display.
The device searches for stations in the current
waveband. Every station found is played for
about 5 seconds. At the same time, the display
shows the current frequency or the station
name.
Stopping scan
f
Press the or
6
button.
The scan process is stopped. The device
remains tuned to the station last played.
Switching radio text on/off
(RADIOTXT)
An FM station may broadcast RDS radio text.
To activate or deactivate the displaying of radio
text,
f
first switch to FM radio mode, if neces-
sary.
f
Press the
MENU
5
button to open the
menu.
f
Press the
MENU
5
button repeatedly
until “RADIOTXT” appears on the display
followed by the current setting “TEXT ON”
or “TEXT OFF”.
f
Turn the volume control
1
counterclock-
wise or clockwise to change between the
settings.
f
Press the
MENU
5
button, repeatedly if
necessary, to close the menu.
Program type (PTY)
Besides transmitting the station name, some
FM stations also provide information on the
Radio mode
02_Rotterdam_UBT_en.indd 47
15.10.13 11:07
