en
Installation Guide
RADION PIR ZB
Wireless Motion Detector
RFPR-ZB/RFPR-ZB-EU/RFPR-ZB-CHI
RFPR-ZB-ES/RFPR-ZB-MS
© 2016 Bosch Security Systems, Inc.
F.01U.314.039 | 02c | 2016.05
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, NY 14450
USA
www.boschsecurity.com
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
0
2
4
6
8
10
0
7
13
20
26
33
0
6
4
2
0
2
4
6
0
20
13
7
0
7
13
20
12
40
≥2.3
≥7.5
≤2.7
≤9
Feet
Fe
e
t
Meters
Me
ter
s
90°
Top: Overhead view
Bottom: Side view
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and receiver.
–
Connect the equipment into an outlet on a circuit diff erent from that to which the receiver
is connected.
–
Consult the dealer or an experienced radio/TV technician for help
IC
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour
l’émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres
utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une
communication satisfaisante.
Key
Dark green - PIR detection zones
Yellow - PIR detection look-down zones
Coverage Pattern
Specifi cations
Dimensions
2.4 in x 4.3 in x 1.7 in
(60 mm x 108 mm x 42 mm)
Batteries
Panasonic CR123A Lithium 3 VDC
Duracell DL123A Lithium 3 VDC
Sanyo CR123A Lithium 3 VDC
Battery life for one battery is up to 7 years. Adding a
second battery (optional) can increase battery life up to 10 years
total.
Battery capacity
1500 mA
Pet immunity
Up to 45 lbs (20 kg).
Operating temperature
-20°F to +130°F
(-30°C to +55°C)
Non-condensing humidity
0% to 93%
Mounting height
7.5 ft to 9 ft
(2.3 m to 2.7 m)
Use
For indoor use only
PRELIMINARY
