Users Guide
for the RF3332 and RF3334
Wireless Keyfobs
1.0
General Information
The RF3332 and the RF3334 are Wireless Keyfobs which allow you
to arm, disarm and, in the case of the RF3334, control other devices
connected to your security system within the protected area. The Key-
fobs are programmed with a unique code which will allow only your
devices to work with your Security System.
Although the range of the keyfob may be up to 500 feet
(150 meters) in open air, normal building materials can
greatly reduce the range of your keyfob. If you are in your
automobile or if your home has aluminum siding, the
range may be reduced even further. We suggest that
you try out your keyfob at various locations on your prop-
erty to test the range.
2.0
Specifications
• Description:
RF3332, RF3334 Wireless Keyfobs
• Dimensions:
- Keyfob:
1.5" w x 2.5" h x .5" d
(38 x 63 x 13 mm)
• Operating Temperature:
-20° to +150°F (-29 to +65°C). 0 to
95% relative humidity (non-condens-
ing.
+32° to +120°F (0° to +49° C) for
UL Certificated Installations.
• Operating Voltage:
Supplied by two 3 VDC lithium
batteries.
• Battery Life:
Approximately 5 years under normal
operating conditions with the
recommended battery types.
• Recommended Battery Types: Duracell DL2025, Eveready
CR2025, or Panasonic
CR2025.
3.0
Features of the RF3332
The RF3332 can arm and disarm your alarm system. The Keyfob has
the ability to send a Panic code to your monitoring company if your
security system is programmed to do so. The LED will flash to indicate
that a signal has been sent to your alarm system.
4.0
Features of the RF3334
The RF3334 can arm and disarm your alarm system. The Keyfob has
the ability to send a Panic code to your monitoring company if your
security system is programmed to do so and to control other devices
within the protected area. The LED will flash to indicate that a signal
has been sent to your alarm system.
5.0
Battery Replacement
The batteries will need to be replaced approximately every 5 years. If
you notice the range of the Keyfob is decreasing or if the LED is not
working, it may be time to replace your batteries. Battery life will vary
depending on the amount of use. The recommended battery types
are Duracell DL2025, Eveready CR2025, or Panasonic CR2025.
1- Remove the cover using a small screwdriver.
2- Insert the new batteries. Observe the polarity.
3- Replace the cover.
FCC COMPLIANCE NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry and Science Canada. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that
may cause undesirable operation.
Changes or modifications not expressly approved by Bosch Security
Systems can void the users authority to operate the equipment.
