Bosch Rexroth VCH 08.1 Скачать руководство пользователя страница 99

Страница: 99 / 120

Select this function if the visualization interface should be loaded from the

control to the IndraControl VCH 08.1 and should be executed.
If "Upload from Data Source" is selected, not the locally filed visualization

software is started, but the application of the control to be visualized is

loaded and started. If the load process fails, an error message will be dis‐

played and the locally filed application will be started.

Disable key state transmission to

control

The UDP telegrams are not transmitted to the control.

Enable key state transmission to

control

●

Control IP:
IP address of the control to which the UDP telegrams are to be sent.
The following data are sent to the control (control IP) via UDP telegram:
–

Key codes for IndraControl VCH 08.1

–

Data of additional elements, e.g. handwheel, override or key switch.

Fig.9-8:

Info Page

The Info Page tab provides information on software versions and memory lo‐

cations for the Bosch Rexroth Service.
After having edited the values and confirmation with the "ENTER" key, the data

is written back into the connection module or into the local file. Then the Indra‐

Control VCH 08.1 is started newly, so that the network driver is initialised with

the modified data.

9.2.7

Basic Settings

All basic settings of the IndraControl VCH 08.1 are made via the "Rexroth Set‐

tings". If an operating system update is performed, the Rexroth Settings start

automatically.
The Rexroth Settings of the IndraControl VCH 08.1 are read out from the In‐

draControl VAC 30.2/3.1 connection module, see also

chapter 7.5 "Personality

Function" on page 85

If the IndraControl VAC 30.2/31.1 connection module is put into

operation the first time, all values are set to the standard values

(Obtain an IP-address via DHCP, disable UDP).

DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal

Bosch Rexroth AG

97/117

Software

Содержание Rexroth VCH 08.1

























































































































Результаты поиска

Содержание Rexroth VCH 08.1

Отзывы:

Похожие инструкции для Rexroth VCH 08.1

Бренды по названию

Популярные бренды

Bosch Rexroth VCH 08.1, Руководство пользователя

Результаты поиска

Содержание Rexroth VCH 08.1

Отзывы:

Похожие инструкции для Rexroth VCH 08.1

Бренды по названию

Популярные бренды